TES 2-2413M

DC/DC Converter TES 2M Series, 2 Watt • Supplementary and reinforced insulation • I/O isolation 4000 VACrms rated for 300 Vrms working voltage • • • • • • Unregulated device • • Available in tape & reel package 2 x MOOP Medical safety ES 60601-1 IEC 60601-1 UL 62368-1 IEC 62368-1 Industrial safety to UL/IEC/EN 62368-1 Ultracompact SMD-package Operating temp. range –25°C to +80°C Qualified for leadfree reflow solder process 3-year product warranty The TES 2M series is range of compact 2W DC/DC-converters providing a high I/O-isolation voltage of 4000 VAC. With a reinforced I/O-isolation system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required. These converters are qualified for high solder temperature profiles in leadfree solder processes. For automated SMD production lines the devices can be supplied in tape & reel package. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order Code Input Voltage Range TES 2-0511M TES 2-0512M TES 2-0513M TES 2-0522M TES 2-0523M TES 2-1211M TES 2-1212M TES 2-1213M TES 2-1222M TES 2-1223M TES 2-2411M TES 2-2412M TES 2-2413M TES 2-2422M TES 2-2423M www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA September 20, 2023 Vnom Efficiency Imax –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA typ. 66 % 66 % 66 % 72 % 73 % 66 % 66 % 66 % 74 % 75 % 66 % 66 % 66 % 74 % 75 % Page 1 / 4 TES 2M Series, 2 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 90 mA typ. 40 mA typ. 30 mA typ. 580 mA typ. 240 mA typ. 120 mA typ. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) 1'000 mA (slow blow) 500 mA (slow blow) 200 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise Capacitive Load - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output single output models: dual output models: See application note: dual output models: 5 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection ±4% max. 1.5% max. 1.5% max. www.tracopower.com/overview/tes2m 1% max. 150 mVp-p max. 330 µF max. 330 µF max. 330 µF max. 100 / 100 µF max. 100 / 100 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. 500 ms max. Limited 0.5 s max., Automatic recovery Safety Specifications Safety Standards - IT / Multimedia Equipment - Medical Equipment - Certification Documents Pollution Degree EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 EN 60601-1 IEC 60601-1 ANSI/AAMI ES 60601-1 CSA-C22.2, No 60601-1 2 x MOOP (Means Of Operator Protection) MOPP (Means Of Patient Protection) www.tracopower.com/overview/tes2m PD 2 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TES 2M Series, 2 Watt EMC Specifications EMI Emissions EN 60601-1-2 edition 4 (Medical Devices) EN 55011 class A (with external filter) EN 55032 class A (with external filter) EN 55011 class A (with external filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/tes2m EN 60601-1-2 edition 4 (Medical Devices) - Conducted Emissions - Radiated Emissions EMS Immunity General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Isolation Resistance Isolation Capacitance Leakage Current Reliability Moisture Sensitivity (MSL) Washing Process - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Touch Current - Calculated MTBF Housing Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –25°C to +80°C +105°C max. –50°C to +125°C 2.22 %/K above 60°C See application note: www.tracopower.com/overview/tes2m Natural convection (20 LFM) 4'000 m max. 50 - 100 kHz (PFM) 80 kHz typ. (PFM) Reinforced Insulation 300 VAC 4'000 VAC 6'000 VAC 10'000 MΩ min. 15 pF typ. 20 pF max. 2 µA max. 2'000'000 h (MIL-HDBK-217F, ground benign) Level 2 (J-STD-033C) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Phosphor Bronze (C5191) Nickel (5 - 7 µm) Tin (5 - 7 µm), matte Plastic Case PCB Mount SMD (Surface-Mount Device) SMD16 Lead-Free Reflow Soldering (acc. J-STD-020E) See application note: www.tracopower.com/info/reflow-soldering.pdf 3.75 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) fbb30ad2-edff-45f0-9c69-c10e6eb7222d Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tes2m All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TES 2M Series, 2 Watt Outline Dimensions 24.0 Pinout (0.039) 10.6 vent hole with membrane on bottom side (Ø 0.06) (to allow proper washing process) 1 7 Dual 1 –Vin (GND) –Vin (GND) 7 NC NC NC Common 0.15 S 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) NC: Not connected (0.71) top view Single 8 9 (0.54) 10 13.7 9.4 16 Pin 0-4° Ø1.5 (0.42) (0.37) S 18.1 9.0 1.00 (0.010) 0.25 (0.35) (0.94) 8 3.11 15.24 2.54 (0.122) (0.600) (0.100) Dimensions in mm (inch) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin tolerances: ±0.05 (±0.002) Recommended Solder Pad Layout 1.6 3.11 15.24 2.54 (0.12) (0.60) (0.10) (0.11) (0.54) (0.65) 13.7 16.6 2.9 (0.06) Dimensions in mm (inch) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4